- Home
- Product
- Dispensing Pump
Product
We provide the best products and services
Dispensing Pump
Large(L) Series Dispensing Pump
The L model, with the same application area as the F model, has a more extensive dispensing volume. In particular, the rotor and driving unit are connected by a special shaft and clamp, enabling a more flexible operation.
Remarks
- The amount of discharge depends on the type and viscosity of the pumped material.
- The stator material is selected according to the characteristics of the pumping liquid and the presence of the filler.
- Special coating on the rotor surface is also available. (Extends the life of the rotor)
- Models with a larger dispensing volume than that of the “L 500” can be ordered.
Workings
Bonding, Optical Bonding, Glob top potting, Under filling, Micro dispensing, Encapsulation, Dan & Fill, Conformal coating, etc.
For
Electronic, E-mobility, Automobile, Aerospace, Pharmaceutical, LED / LCD / OLED Lighting, Medical, Biotechnology, Cosmetic, Food, 3D Printing, Solar, Battery, General Industries, etc.
Large(L) Series Specification
| Specification | L 40 | L 80 | L 200 | L 500 |
|---|---|---|---|---|
| Dispensing Rate (cc/min) | 40 ~ 600 | 80 ~ 1,170 | 300 ~ 3,000 | 500 ~ 7,500 |
| Dispensing Pressure (Bar) | 20 Bar | |||
| Suction limiting pressure (Bar) | 6 | |||
| Dispensing Repeatability | ±1% | |||
| Maximum Number of Revolutions | 150 | |||
| Pump Material | Stainless Steel and Aluminum | |||
| Stator Material | Hi-pro, Hi-per, Hi-act | |||
| Rotor Material | Stainless Steel with Chrome Coated | |||
| Sealing | Triple arranged special seals or Mechanical Seal | |||
| Motor | Stepping or Servo motor | |||
| Specification | L 40 |
|---|---|
| Dispensing Rate (cc/min) | 40 ~ 600 |
| Dispensing Pressure (Bar) | 20 Bar |
| Suction limiting pressure (Bar) | 6 |
| Dispensing Repeatability | ±1% |
| Maximum Number of Revolutions | 150 |
| Pump Material | Stainless Steel and Aluminum |
| Stator Material | Hi-pro, Hi-per, Hi-act |
| Rotor Material | Stainless Steel with Chrome Coated |
| Sealing | Triple arranged special seals or Mechanical Seal |
| Motor | Stepping or Servo motor |
| Specification | L 80 |
|---|---|
| Dispensing Rate (cc/min) | 80 ~ 1,170 |
| Dispensing Pressure (Bar) | 20 Bar |
| Suction limiting pressure (Bar) | 6 |
| Dispensing Repeatability | ±1% |
| Maximum Number of Revolutions | 150 |
| Pump Material | Stainless Steel and Aluminum |
| Stator Material | Hi-pro, Hi-per, Hi-act |
| Rotor Material | Stainless Steel with Chrome Coated |
| Sealing | Triple arranged special seals or Mechanical Seal |
| Motor | Stepping or Servo motor |
| Specification | L 200 |
|---|---|
| Dispensing Rate (cc/min) | 300 ~ 3,000 |
| Dispensing Pressure (Bar) | 20 Bar |
| Suction limiting pressure (Bar) | 6 |
| Dispensing Repeatability | ±1% |
| Maximum Number of Revolutions | 150 |
| Pump Material | Stainless Steel and Aluminum |
| Stator Material | Hi-pro, Hi-per, Hi-act |
| Rotor Material | Stainless Steel with Chrome Coated |
| Sealing | Triple arranged special seals or Mechanical Seal |
| Motor | Stepping or Servo motor |
| Specification | L 500 |
|---|---|
| Dispensing Rate (cc/min) | 500 ~ 7,500 |
| Dispensing Pressure (Bar) | 20 Bar |
| Suction limiting pressure (Bar) | 6 |
| Dispensing Repeatability | ±1% |
| Maximum Number of Revolutions | 150 |
| Pump Material | Stainless Steel and Aluminum |
| Stator Material | Hi-pro, Hi-per, Hi-act |
| Rotor Material | Stainless Steel with Chrome Coated |
| Sealing | Triple arranged special seals or Mechanical Seal |
| Motor | Stepping or Servo motor |