- Home
- Product
- Single Liquid Meter Mix Dispenser
Product
We provide the best products and services
Bond Dispenser
It is a dispenser that dispenses the measured low-viscosity liquid materials such as an instant adhesive and an anaerobic adhesive into a tube. (The minimum amount depends on the inner diameter of the tube)
Bond dispenser equipped with a high-speed 32bit microprocessor
Automated line management possible with the RS-232, 485 communication function
Reduced noise and increased precision through the micro-step operation
2 ~ 500RPM
Vacuum prevents the liquid condensation
| Outer dimensions (mm) | 200 x 70 x 141 |
|---|---|
| Weight | 2.7kg |
| Power supply | AC 220V, 50 / 60HZ |
| Rated wattage | 25W |
| Rotor RPM | 2 ~ 500RPM |
| Dispensing rotation angle | 0 ~ 999˚ |
| Dispensing time | 0.1 ~ 99.9′ / 0.01 ~ 9.99′ |
| Minimum dispensing amount | 0.001cc |
| Dispensing viscosity | 5.000cps or less |
| Applicable tube | Φ0.8 ~ Φ2.5 |
| Operation mode | AUTO – Rotate as much as the discharge signal set MANUAL – Rotate as much as the discharge signal COUT – Normal rotation |
| Communication | RS-232 1ch, RS-485 1ch (Option) |
| Input/output signal | Foot Switch, Finger Switch (Option) No-voltage N.O |
| Input signal time | Min 0.05 Sec or more |
| End signal | N.O Relay (Max DC24V, 500mA) |
| Vacuum | O |
| Operating temperature | 5 ~ 50℃ |