Bond Dispenser

It is a dispenser that dispenses the measured low-viscosity liquid materials such as an instant adhesive and an anaerobic adhesive into a tube. (The minimum amount depends on the inner diameter of the tube)

Bond dispenser equipped with a high-speed 32bit microprocessor

Automated line management possible with the RS-232, 485 communication function

Reduced noise and increased precision through the micro-step operation

2 ~ 500RPM

Vacuum prevents the liquid condensation

Outer dimensions (mm)	200 x 70 x 141
Weight	2.7kg
Power supply	AC 220V, 50 / 60HZ
Rated wattage	25W
Rotor RPM	2 ~ 500RPM
Dispensing rotation angle	0 ~ 999˚
Dispensing time	0.1 ~ 99.9′ / 0.01 ~ 9.99′
Minimum dispensing amount	0.001cc
Dispensing viscosity	5.000cps or less
Applicable tube	Φ0.8 ~ Φ2.5
Operation mode	AUTO – Rotate as much as the discharge signal set MANUAL – Rotate as much as the discharge signal COUT – Normal rotation
Communication	RS-232 1ch, RS-485 1ch (Option)
Input/output signal	Foot Switch, Finger Switch (Option) No-voltage N.O
Input signal time	Min 0.05 Sec or more
End signal	N.O Relay (Max DC24V, 500mA)
Vacuum	O
Operating temperature	5 ~ 50℃

Product List