Meter Mix Dispenser Common PR-2D Ⓡ

Common PR-2D Type is a piston pump type two-component liquid meter mix dispenser, suitable for dispensing medium / large volumes, from 20 to 100 grams.

Features of a PR-2D Common TYPE

The vertical operation piston pump and rod type is suitable for high-viscosity filler-containing liquids
The bypass function prevents the clogging of tanks and pipes during the filler sedimentation with a unique circulating mixer block structure
Equipped the two-piston pump unit which enables two operators to work individually or simultaneously
Dispensing the amount control method: equipped with a linear sensor when the mechanical or electrical control and the precise dispensing work are required
Drain valve can be attached to prevent the resin sedimentation and hardening in the piston pump

Standard Specification

Mixing Rate

Select within 100:100 ~ 100:10 (Fixed-Mixing Rate Type)

Shot Amount

1cc / sec-10cc.sec (Digital Timer Type)

Mixing Accuracy

Within +-1%

Shot Accuracy

Within +-3%

Viscosity

1 cps-Paste

Auto anti-gel shot

Set-up According to Pot-life of Resin (Micro Processor Type)

A/B Tank

Stainless Steel 304, 30L (50L – Optional)

Cleaner Tank

Stainless Steel 304, 10L

Mixer

Static Mixer Type (Power Mixer Type – Optional)

Shot Signal

Foot S/W Type (Hand S/W Type – Optional)

Control Type

Micro Processor Type

Electricity

220V / Single Phase / 60Hz

Air Pressure

Over 4kgf/cm

Optional Items

Tank / Line Preheater

An automatic temperature control device is attached from the resin tank to the mixer, enabling a stable metered discharge regardless of the changes in resin viscosity in the winter.

Tank Agitator

An agitating device can be attached to prevent the sediments in the liquid containing the filler inside the resin tank and to remove air bubbles smoothly.

Tank Vacuum Degassing Device

A vacuum device can be attached to remove the air bubbles in the resin tank and to supply the resin to the tank.

Product List